HP | Depth in Meter | Depth in Feet | Discharge (LPH) |
---|---|---|---|
1.0 HP, 1.5 HP and 2.0 HP | 30 to 120 | 100 to 400 | 900 to 8200 |
- Water can be drawn from deep borewells.
- This pump is very successful in low yield borewells getting dried frequently. Dry running will not affect this pump set.
- Only pipe lines are kept in the borewell. The compressor pump and motor can be installed at any required place away from the borewell.
- The installation and maintenance is very simple. Only oil level is to be maintained properly. Please check the oil level in the pump periodically.
- These compressor pumps can be operated with motor or kerosene engines also (with some small alteration in bed).
Model | Type | Motor kW HP | No.of Cylinder | Pressure Kg/cm 2 | Com/mot RPM | Air Pipe (mm) | Water pipe (mm) | Air jet Submergence | Lifting Height | Depth in (Meters) Feet | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(30) |
(45) |
(60) |
(90) |
(120) |
||||||||||
B1-1 M1 | Belt | 0.75 (1.0) | Single | 8 | 1000 1420 |
12 | 25 | 25% | 75% | 1500 | 1350 | 1150 | 1000 | 900 |
50% | 50% | 1800 | 1500 | 1300 | 1100 | 1000 | ||||||||
75% | 25% | 4000 | 3000 | 2750 | 2500 | 2400 | ||||||||
B1-1.5 M1.5 | Belt | 1.1 (1.5) | Single | 10 | 850 1420 |
12 | 25 | 25% | 75% | 1700 | 1550 | 1300 | 1100 | 1000 |
50% | 50% | 2100 | 1700 | 1450 | 1200 | 1100 | ||||||||
75% | 25% | 4150 | 3100 | 2900 | 2600 | 2500 | ||||||||
B1-2 M2 | Belt | 1.5 (2.0) | Single | 11 | 800 1420 |
12 | 25 | 25% | 75% | 3000 | 2700 | 2400 | 1950 | 1750 |
50% | 50% | 3600 | 3000 | 2600 | 2200 | 2000 | ||||||||
75% | 25% | 8000 | 6000 | 5500 | 5100 | 4800 | ||||||||
B2-2 | Belt | 1.5 (2.0) | Double | 11 | 750 1420 |
12 | 25 | 25% | 75% | 3200 | 2900 | 2600 | 2050 | 1850 |
50% | 50% | 3800 | 3200 | 3000 | 2300 | 2100 | ||||||||
75% | 25% | 8200 | 6200 | 5700 | 5200 | 4900 |